Sign In | Join Free | My vivirlatino.com
Home > End Suction Centrifugal Pump >

Single Stage End Suction Centrifugal Pump , Single Suction Close Coupled Centrifugal Pump

GSD Industrial Co., Ltd.
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment

Single Stage End Suction Centrifugal Pump , Single Suction Close Coupled Centrifugal Pump

Brand Name : GSD
Model Number : GPS
Certification : ISO , CE
Place of Origin : CHINA
MOQ : Negotiation
Price : Negotiation
Supply Ability : 2000 UNITS PER MONTH
Delivery Time : 2-3 WEEKS
Packaging Details : PLYWOOD CASE
Power : 0.37 -9 0 kW ( 0.5 - 120 hp )
Impeller : Close , semi - open type
Flow : 864 m3/h ( 3804 US gpm )
Pressure : Max. 132 m (433 ft)
Usage : Water
Contact Now

Single Stage End Suction Centrifugal Pump , Single Suction Close Coupled Centrifugal Pump

Application
A) Air-condition cold or hot water circulation.
B) Installed together with other equipment
C) For fire-fighting water system

Features
A) The optimal hydraulic model is used for impeller; the pump is of an utmost dynamic-static balance and reliable performance.
B) Shaft is an extended one from the motor, so the concentricity is absolutely reliable.
C) Supported by imported bearing, runs at little vibration and low noise.
D) Small volume,light weigh
E) Close type & semi-open type impeller are available
F) Easy installation

Before assembling the pump
First check whether the parts have defects that may affect assembly. Clear away the burrs, clean the pump, and then the assembly can be conducted.

  • Screw tightly all joint bolts and pipe plugs on corresponding parts separately in advance.
  • Place the O -ring on the bracket in advance.
  • Install the seal ring in the pump casing and bracket in advance. And lock it with screw.
  • Install the bracket on the motor and lock the screw. Wash the installation position of stationary ring of mechanical seal with butanone. Apply oil on the seal ring of stationary ring and install it. Clean the mechanical seal and install movable ring. Then install the key, impeller, washer, impeller nut in turn and lock them.
  • Install the mounted parts into the pump casing and lock the bolt; check whether the rotation is flexible when turning the impeller at the entrance.
  • Rectify whether the water outlet is level on the platform. If it’s rugged, loose the nut of motor and bracket to adjust it.
  • Make static pressure test with pressure more than 1.5 times of working pressure, and keep the pressure for 5 minutes, to check whether there is leakage. When doing static pressure test, make several turns of the pump.


Points for attention of installation

  • When installing, the pumping position should approach the water level as far as possible;
  • The minimum space from foot valve to the pool bottom should be >D×0.75 times, the depth of the suction pipe dipping into water should be >D×1.5 times; the distance from the suction pipe center to the pool wall should be >D×3 times.
  • When two sets of pumping are installed side by side, pay attention to the interval, which is generally >D×3 times;
  • The suction pipe should adopt less bend pipes as far as possible, to prevent part of the suction pipe higher than the pumping center;
  • The foot valve should adopt full flow foot valve, or the open area of foot valve should be larger than the sectional area of suction pipe;
  • When the caliber of the suction pipe needs to be enlarged, the balanced expander (concentric expander) can not be used, instead, the eccentric expander shall be used and the top shall be flat and assembled;
  • When using the closed flume, the horizontal fixed suction pipe can not be used, the convenience for the maintenance of the foot valve in the future shall be considered.


The minimum space from foot valve to the pool bottom should be >D×0.75 times, the depth of the suction pipe dipping into water should be >D×1.5 times; the distance from the suction pipe center to the pool wall should be >D×3 times.

Construction

No.NameMaterial
GBJIS
1Shaft1Cr13SUS410
2BracketHT200FC200
3Pump casingHT200FC200
4PlugQ215ASS34(SS330)
5O-ringNBRNBR
6Mechanical sealC/AL2O3C/AL2O3
7ImpellerHT200FC200
8Key45S45C
9FeetHT2500/Q215AFC200/SS34(SS330)
10Motor




Work Shop photos



























Product Tags:

centrifugal end suction pump

      

water centrifugal pump

      
China Customized Inflatable Bumper Ball Game Bubble Adult Grass CE supplier

Single Stage End Suction Centrifugal Pump , Single Suction Close Coupled Centrifugal Pump Images

Inquiry Cart 0
Send your message to this supplier
 
From:
Enter your email please.
To: GSD Industrial Co., Ltd.
Subject:
Message:
Characters Remaining: (0/3000)
 
Inquiry Cart 0