Surface Automatic High Pressure Aerator Water Treatment Unique 50Hz
1. Sewage treatment
2. POME treatment
3. Industrial W.W treatment
1. Motor Spec: 415V 50Hz 3Phase
2. Insulation: Class F, IPW 54
3. Duty Type: S1
4. Reliable Sealing Components & Bearing
5. Unique designed impeller, stainless steel material.
6. FRP floating with stainless steel water inlet pipe & seal
7. Designed for continuous operation.
8. High oxygen transfer efficiency
9. Easily incorporated into existing plans.
1. Each aerator shall consist essentially of a motor, drive shaft,
impeller directly driven at constant speed, and an intergral
flotation unit, which shall support the weight of certain
accessories that may be added.
2. All wetted metal parts shall be of corrosion resistant
materials, and shall not require painting.
3. Motor and shaft: The electric power unit is the heart of the
machine, and is located above the high-density spray-diffusion zone
to minimize its exposure to the nature and contents of the pumped
4. The hull is completely filled with high-density closed cell
5. The mooring eyes transfer tension from one mooring cable
6. At the same time, this pumping action creates a tank velocity
pattern which insures the mixing of contents and thus the oxygen
7. Year of experience in the design and application of mechanical
aeration equipment have been combined with the full capabilities of
our extensive research test factility to provide a line of high
speed aerators which not only maximize oxygen transfer and tank
mixing characteristics but perform these function in the most
economical and reliable manner.