Horizontal Explosion Proof Submersible Mixer Self - Cleaning With
1. The two rows of independent mechanical sealing ensure the
long-term and reliable operation of the submersible motor.
2. The international well-know high-quality bearings have longer
service life, which is maintain free.
3. The in-built leakage sensor and the device for the over
temperature protection for the windings of the stator(No leakage sensor for MA0.37/6 or MA0.55/4).
4. The mixer agitators have the stainless steel pressing impeller,
which are of the sweptback shape through the optimized design, resulted in high efficiency and self-cleaning function.
5. The vanes of the low-speed flow propeller are made of FRP, which
are sweptback shape, have the self-cleaning function, the smooth and streamlined propeller surface distribut6es the
propelling power equally.
The purpose of mixing, agitating and making ring flows in the
process of municipal and industrial sewage treatment: active sludge
tank, bioreactor tank, mixing tank, equalizing reservoir, sewage
tank and ect.; The maintenance equipment for the landscape water
environment, improving the quality of the water body; Creating
water flow, effectively preventing the sedimentation of the
|4||Mechanical Seal stand||SUS304|
|5||Front bearing support||FC200|
|11||Inner hexagonal screw||SUS304|
|13||O-type sealant ring||NBR-70|
|14||General flat key||S45C|
|15||Wheel clamp ring||SUS304|
Structure and function:
The parts designed for the submersible mixer can allow the mixer to
obtain optimum performance.
Note: MA0.85/8 ,MA1.5/6,MA0.85/8 and MA1.5/6 mixer don’t have
thermo-switches and leakage protectors.
- Electrical cable inlet:Use watertight cable at the cable inlet.
- Electrical motor: The motor of the submersible mixer is a three
phase squirrel cage asynchronous machine, with protection degree of
IP68, and insulation degree of F(155℃). Continuous service of the
submersible motor is allowed, and it cannot be started up over 10
times in an hour.
- Shaft sealing: two Mechanical seals contained.
- Impeller: The impeller contains three vanes, which are wide and
thin, the surface is smooth, and the type is sweepback. This design
ensures high efficiency and non-block running.
- Install elevator system: This system contains a guide rail system
and hoisting system.
- Monitoring device: Stator has two thermo-switches connected in
series, which are shut off automatically at 135℃.
|Mixing model||Motor power|
|rpm of propeller|
|Diameter of propeller|